|
|
 
|
| PRODUCTS |
|
M12 - 80 bar all metal sensors
Sensors for food and sea-water and marine applications.
At the present time, the delivery program includes sizes M12, M18, and M30 in embeddable and non-embeddable executions. Further sizes are in preparation. The available sizes are basically standardized. Varying from the standard, the series 700 offers however long operating distances. These operating distances are more-over also achieved on the most important non-ferrous metals. Of further particular interest is the one-piece stainless steel housing, sensing face included.
The range includes devices of food-safe and corrosion-resistant stainless steel (V4A / AISI 316L / DIN 1.4435), featuring IP 68 + IP 69K degree of protection, for the food and pharmaceutical industries, as well as for sea-water and marine applications.
All devices are available in 3-wire DC NPN and PNP executions. All 3-wire models are available in N.O. and N.C. configurations; a LED output state indicator is standard. In addition, all the important protection functions are built in, such as short-circuit and overload protection,
full polarity reversal protection, induction protection, EMC protection, power-on reset, etc.
Above and below water applications.- On ships and submarines
- In harbour installations
- In locks and docks
- On offshore installations
- Fish processing
Return to Contrinex sensors for food and seawater applications at Seltec.
|
|
| M12 - 80 bar all metal sensors |
|
|
|
|
|
70mm body, 6.0mm embeddable, DC supply |
|
- Contrinex - Switzerland
- Housing: Stainless steel V4A
- Connection: Corrosion-resistant TPE-S cable, 2m
- Protection: IP68 + IP69K
- 80 Bar pressure rating (cable versions)
- Frequency: 400Hz
- Supply: 10-30VDC
- Temperature: -25 to +85C
|
|
DW-LD-70?-M12 Inductive sensor
|
|
 |
|
|
|
60mm body, 6.0mm embeddable, DC supply |
|
- Contrinex - Switzerland
- Housing: Stainless steel V4A
- Connection: M12 connector
- Protection: IP68 + IP69K
- Frequency: 400Hz
- Supply: 10-30VDC
- Temperature: -25 to +85C
|
|
DW-LS-70?-M12 Inductive sensor
|
|
|
|
|
|
70mm body, 10.0mm non-embeddable, DC supply |
|
- Contrinex - Switzerland
- Housing: Stainless steel V4A
- Connection: Corrosion-resistant TPE-S cable, 2m
- Protection: IP68 + IP69K
- 80 Bar pressure rating (cable versions)
- Frequency: 400Hz
- Supply: 10-30VDC
- Temperature: -25 to +85C
|
|
DW-LD-71?-M12 Inductive sensor
|
|
|
|
|
|
60mm body, 10.0mm non-embeddable, DC supply |
|
- Contrinex - Switzerland
- Housing: Stainless steel V4A
- Connection: M12 connector
- Protection: IP68 + IP69K
- Frequency: 400Hz
- Supply: 10-30VDC
- Temperature: -25 to +85C
|
|
DW-LS-71?-M12 Inductive sensor
|
|
|
|
|
|
|
|
>>> Special offers <<< |
|
Sensors |
|
Motor Control Solutions |
|
Safety Products |
|
Shaft Encoders |
|
Switchgear & Panel Indicators
|
|
Instrumentation |
|
DIN Rail Terminals |
|
Power Supplies |
|
RFID |
|
Batteries
|
|
Electronic Housings |
|
Serial interface connectors |
|
Interface relays |
|
Surge Protection |
|
|
