| Red Lion Controls signal conditioners |
|
|
|
|
|
| Red Lion Controls - USA | IFMA0065: 85-250Vac supply IFMA0035: 9-32Vdc supply
| | | | User Settable Full Scale Frequency from 1 Hz to 25 KHz | | Four Output Operating Ranges | | Programmable Input Circuit Accepts Outputs from a Variety of Sensors | | 85 to 250 VAC and 9 to 32 VDC Powered Versions Available | | Low Frequency Cut-out and Overrange Indication | | 3-way Electrical Isolation (Power/Input/Output) | | |
|
|
IFMA Frequency to analogue converter
|
|
 |
|
|
|
| Red Lion Controls - USA | IFMR0066: 85-250Vac supply IFMR0036: 9-32Vdc supply
| | | | User Settable Trip Frequency, from 0.1 Hz to 25 kHz | | Programmable Input Circuit Accepts Outputs from a Variety of Sensors | | 85 to 250 VAC and 9 to 32 VDC Powered Versions Available | | Over-speed, Under-speed, and Zero-speed Detection | | Relay Latching, Alarm Override, and Alarm Reset Functions | | Hysteresis and Offset Functions Available | | |
|
|
IFMR Speed switch, Relay output
|
|
 |
|
|
|
| Red Lion Controls - USA | | IAMA3535 Universal Signal Conditioner | | | | 3-Way Isolation | | Switch Selectable Inputs & Outputs | | 100 Different Input and Output Combinations | | 9 to 32 VDC Powered | | |
|
|
IAMA3535 Universal Signal Conditioner
|
|
 |
|
|
|
| Red Lion Controls - USA | APMR0016: 230Vac supply APMR0086: 380Vac supply APMR0096: 480Vac supply
| | | | Protects Against Phase Loss, Unbalance, Under Voltage, and Phase Reversal | | Available in 230, 380 or 480 VAC | | Low cost | | DIN Rail Mountable | | Inrush Under Voltage Delay |
|
|
APMR 3-Phase Monitor Module
|
|
 |
|
|
|
| Red Lion Controls - USA | | ICM40030 Serial Converter RS232/RS485 | | | | LED Indication for RXD,TXD, and Power | | Half Duplex (RS485) and Full Duplex (RS422) | 9 to 32 VDC Power | | DIN Rail Mountable | | |
|
|
ICM40030 Serial Converter RS232/485
|
|
 |
|
|
|
| Red Lion Controls - USA | | ICM50000 Serial Converter RS232/485 3-way isolation up to 115K | | | | Three Way Isolation protects serial equipment from ground loops (1000 VDC) | | Modular RJ jack or screw terminals for RS485 connection | 9-pin D-SUB for RS232 Connection | | Selectable DTE & DCE Operation - Works with any RS232 cable | | Selectable Baud Rates from 9600 to 115200 | | LED Indication for RXD,TXD, and Power | Half Duplex (RS485) and Full Duplex (RS422) | | 9 to 26 VDC Power | | |
|
|
ICM50000 Serial Converter RS232/485 3-way isolation up to 115K
|
|
 |
|
|
|
| Red Lion Controls - USA | | ICM80000 Communications gateway | | | | Communication Gateway for Red Lion products | | Protocols available: RS232, RS485 and Ethernet | | Programmable via Crimson 2.0 Software | | USB Programming port | | Protocol conversion feature converts numerous protocols simultaneously | | Extensive built-in driver list allows easy data mapping to PLCs, PCs, and SCADA systems | | 10 Base-T/100 Base-TX Ethernet connection can connect to an unlimited number of devices via four protocols simultaneously |
|
|
ICM80000 Communications gateway
|
|
 |
|
|
|
| Red Lion Controls - USA | | SWITCH08 8 port Ethernet switch | | | | Unmanaged switch requires no configuration | | Supports 10/100 MDPS network | | Auto Half/full Duplex negotiation | | Auto-Crossing detection | | Supports standard and crossover Ethernet cables |
|
|
SWITCH08 8 port Ethernet switch
|
|
 |
|
|
|
| Red Lion Controls - USA | | IAMS0001 Universal signal conditioning module with analog output | | | | Universal Input, Process, mA DC, VDC, TC, 100 (RTD, Potentiometer, and Linear Resistance) | | Universal Power Supply, 21.6 to 253 VAC/ 19.2 to 300 VDC | | 3-way Isolation (Power/Signal/Output) | | Analog output model | | Programming available in seven different languages | | Requires PGMMOD00 for programming | | PGMMOD can store configuration and be used to programme multiple units |
|
|
IAMS0001 Universal signal conditioning module with analog output
|
|
 |
|
|
|
| Red Lion Controls - USA | | IAMS0010 Universal signal conditioning module with dual setpoints | | | | Universal Input, Process, mA DC, VDC, TC, 100 (RTD, Potentiometer, and Linear Resistance) | | Universal Power Supply, 21.6 to 253 VAC/ 19.2 to 300 VDC | | 3-way Isolation (Power/Signal/Output) | | Dual setpoint relay outputs | | Programming available in seven different languages | | Requires PGMMOD00 for programming | | PGMMOD can store configuration and be used to programme multiple units |
|
|
IAMS0010 Universal signal conditioning module with dual setpoints
|
|
 |
|
|
|
| Red Lion Controls - USA | | IAMS0011 Universal signal conditioning module with analog and dual setpoints | | | | Universal Input, Process, mA DC, VDC, TC, 100 (RTD, Potentiometer, and Linear Resistance) | | Universal Power Supply, 21.6 to 253 VAC/ 19.2 to 300 VDC | | 3-way Isolation (Power/Signal/Output) | | Dual setpoint relay outputs and analog output | | Programming available in seven different languages | | Requires PGMMOD00 for programming | | PGMMOD can store configuration and be used to programme multiple units |
|
|
IAMS0011 Universal signal conditioning module with analog and dual setpoints
|
|
 |
|
|
|
| Red Lion Controls - USA | | PGMMOD00 Programming display module for IAMS units | | | | The module easily connects to the front of the IAMS and is used to enter or adjust the programming of the module. | | For applications that require more than one IAMS, the same programming module can be used to program multiple units. | | Display: LCD display with 4 lines | | Can be password protected | | Programming available in seven different languages |
|
|
PGMMOD00 Programming display module
|
|
 |