|
|
 
|
| PRODUCTS |
|
Series 500 - Long distance
The delivery program includes sizes from diameter 4 mm to M30 in quasi-embeddable (Ø 4 mm and M5 recess mountable) and non-embeddable executions. These sizes are standardized. Varying from the standard, the series 500 offers however greater operating distances (2.2 ... 3 times the standard values).
The devices are available in 3-wire DC NPN and PNP executions, in either N.O. or N.C. configuration; a LED output state indicator is standard. In addition, all the important protection functions are built in, such as short-circuit and overload protection, full polarity reversal protection, induction protection, EMC potection, power-on reset, etc.
The range additionally includes devices with analog output. For most models, a voltage output (0 ... 5 V or 0 ... 10 V) and a current output (1 ... 5 mA or 4 ... 20 mA) are simultaneously available. For the moment, devices are available in sizes M8, M12, M18, and M30 quasi-embeddable, as well as M30 non-embeddable.
Return to Contrinex 8 x 8mm sensors at Seltec.
|
|
| Series 500 - Long distance |
|
|
|
|
|
40mm body, 3.0mm quasi-embeddable, DC supply |
|
- Contrinex - Switzerland
- Housing: Chrome-plated brass
- Connection: PVC cable, 2m
- Protection: IP67
- Frequency: 1000Hz
- Supply: 10-30VDC (3-wire)
- Temperature: -25 to +70C
|
|
DW-AD-50?-C8 Inductive sensor
|
|
 |
|
|
|
50mm body, 3.0mm quasi-embeddable, DC supply |
|
- Contrinex - Switzerland
- Housing: Chrome-plated brass
- Connection: M8 3-pin connector
- Protection: IP67
- Frequency: 1000Hz
- Supply: 10-30VDC (3-wire)
- Temperature: -25 to +70C
|
|
DW-AS-50?-C8 Inductive sensor
|
|
|
|
|
|
|
|
>>> Special offers <<< |
|
Sensors |
|
Motor Control Solutions |
|
Safety Products |
|
Shaft Encoders |
|
Switchgear & Panel Indicators
|
|
Instrumentation |
|
DIN Rail Terminals |
|
Power Supplies |
|
RFID |
|
Batteries
|
|
Electronic Housings |
|
Serial interface connectors |
|
Interface relays |
|
Surge Protection |
|
|
